X-Star Premium OrangeRemote Controller Black

Step 1 Open the Starlink app and tap Start.

Starlink App Landing Page

Step 2 
Tap the small RC transmitter symbol located near the status bar.

Starlink App First Person View Mode

Step 3
 Tap RC Calibration. 

Starlink App Remote Control Settings

Step 4 
Release both command sticks and the Gimbal Pitch Dial to the central position. The three centered circles on the RC calibration screen will be highlighted successively. Tap Start to begin calibration.

Starlink App RC Calibration Settings

Step 5
ush both command sticks outwards in all four directions, holding for 2 seconds in each direction.

Step 6 Turn the Gimbal Pitch Dial clockwise and counterclockwise to its two ends and hold for 2 seconds at each end. All the bars on the screen will be fully highlighted when the calibration is completed. Tap Complete to finish. 

Starlink App RC Calibration Settings Complete

If you prefer, you can quickly access RC calibration by pressing and holding the Power Remote Controller Power Button Iconand Take Off Remote Controller Take Off Button Iconbuttons together for 3 seconds instead of navigating there with the Starlink app.

Remote Control Calibration Shortcut Power+Take Off

NOTE: If the compass calibration repeatedly fails, please contact our customer support department.

Back to Tutorial Articles